Men's Warm Waterproof Snow Walking Shoes - SH100 WARM - Mid.

MEN'S

HIKING

2 Years

Based on the field and lab tests carried out to measure the perception of cold with a panel of users, we gauge the thermal insulation of our boots when stationary (static -11°C) and when moving (dynamic -20°C). As a result, you now have an accurate measure of the temperature at which you are protecting with these boots. The comfort temperature ratings are given for the boots. We take into consideration the differences in perception between men and women.

Your boots are designed with a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering while allowing moisture to escape.

Thermal comfort is a balance between the warmth of the boots and its ability to allow the foot to breathe. Too much heat or not enough breathability, damp accumulates and cold can set in. We have designed your boots with your activity in mind, be it occasional or regular, with a membrane which prevents water ingress and allows damp out.

We have checked that your shoes are waterproof with laboratory tests that simulate walking with feet half immersed in water and with wear and ageing tests in the field. During the waterproofing test, we test 3 levels of waterproofing: 2000 flexes (approx. 4 km walk), 4000 flexes (approx. 8 km walk) and 8000 flexes (approx. 16 km walk). This boot model has been tested for up to 2000 flexes, which is equivalent to 4km of walking.

The grip of the boots is linked to the studs, their number and shape. Traction depends on the materials and ridges used on the soles, like your car's tires. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot. Grip prevents the shoe from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving grip to the sole."

Equipped with SNOWCONTACT soles, your boots are designed for maximum grip comfort for hiking and traction on snow. The layout and height of crampons (3mm) is designed for optimal grip when walking on snow. The surface and design of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to not slip.

The SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.

Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.

To be well equipped in winter, we recommend that you follow these principles : Warmth: warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool) Breathability: Choose the sock according to the intensity of the hike and make sure you get a breathable model to minimise moisture. Boot height: adjust the height of the sock to the height of the boot and preferably choose high models if want more protection.

A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. Products (spray or liquid) designed specifically for this purpose are available in our stores.

This product is guaranteed for 2 years from the date shown on the sales receipt. A product covered by the warranty will be repaired or exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear and improper use.

The environmental impact of the product is calculated based on its entire life cycle and using different indicators. A score from A to E is given to help you easily identify the most eco-friendly products by comparing products of a similar type. Decathlon is committed to this approach. Check out our efforts in the area of sustainable development: http://developpement-durable.decathlon.com/

Store your products in a well-ventilated room away from light and moisture.

Upper of : 78.0% Polyester (PES), Upper of : 22.0% Polyurethane (PU) Outer sole of : 70.0% Rubber - Synthetic, Outer sole of : 30.0% Rubber - Butadiene Rubber (BR) Lining and sock of : 100.0% Polyester (PES) Warm lining : 100.0% Polyester (PES)

Based on the field and lab tests carried out to measure the perception of cold with a panel of users, we gauge the thermal insulation of our boots when stationary (static -11°C) and when moving (dynamic -20°C). As a result, you now have an accurate measure of the temperature at which you are protecting with these boots. The comfort temperature ratings are given for the boots. We take into consideration the differences in perception between men and women.

Your boots are designed with a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering while allowing moisture to escape.

Thermal comfort is a balance between the warmth of the boots and its ability to allow the foot to breathe. Too much heat or not enough breathability, damp accumulates and cold can set in. We have designed your boots with your activity in mind, be it occasional or regular, with a membrane which prevents water ingress and allows damp out.

We have checked that your shoes are waterproof with laboratory tests that simulate walking with feet half immersed in water and with wear and ageing tests in the field. During the waterproofing test, we test 3 levels of waterproofing: 2000 flexes (approx. 4 km walk), 4000 flexes (approx. 8 km walk) and 8000 flexes (approx. 16 km walk). This boot model has been tested for up to 2000 flexes, which is equivalent to 4km of walking.

The grip of the boots is linked to the studs, their number and shape. Traction depends on the materials and ridges used on the soles, like your car's tires. Traction optimises propulsion, prevents the boot from slipping backwards when going uphill and stabilises the boot. Grip prevents the shoe from slipping and skidding on smooth ground or in demanding conditions (rain, snow, ice) by giving grip to the sole."

Equipped with SNOWCONTACT soles, your boots are designed for maximum grip comfort for hiking and traction on snow. The layout and height of crampons (3mm) is designed for optimal grip when walking on snow. The surface and design of the studs are designed to perfectly grip the layer of hard snow and evacuate excess water to not slip.

The SNOWCONTACT soles are made with a specific component and stud pattern that is designed to ensure the best possible grip and traction. SNOWCONTACT soles are more effective than traditional soles on snow. When walking on ice, the only way to ensure optimum safety is to add anti-slip grips to your boots.

Our engineers conduct laboratory tests to ensure that the product fully complies with your satisfaction in use. Our verifications include the following elements: tearing eyelets and straps, gluing, toxicology, UV resistance, abrasion resistance of outsole and upper components, accelerated ageing.

To be well equipped in winter, we recommend that you follow these principles : Warmth: warmth provided by a warm pair of socks (ideally containing a suitable percentage of wool) Breathability: Choose the sock according to the intensity of the hike and make sure you get a breathable model to minimise moisture. Boot height: adjust the height of the sock to the height of the boot and preferably choose high models if want more protection.

A fabric's water repellent property is its capacity to make water run off its surface without seeping in. This prevents the fabric from soaking up water and keeps it lightweight, warm and breathable. The water repellent property is achieved by treating the fabric's exterior. This treatment needs to be renewed during the lifetime of the garment. Products (spray or liquid) designed specifically for this purpose are available in our stores.

This product is guaranteed for 2 years from the date shown on the sales receipt. A product covered by the warranty will be repaired or exchanged free of charge. The warranty covers product defects, excluding those resulting from normal wear and tear and improper use.

The environmental impact of the product is calculated based on its entire life cycle and using different indicators. A score from A to E is given to help you easily identify the most eco-friendly products by comparing products of a similar type. Decathlon is committed to this approach. Check out our efforts in the area of sustainable development: http://developpement-durable.decathlon.com/