DRY1 26x2.00 Stiff Bead Mountain Bike Tyre / ETRTO 50-559

NO GENDER

MOUNTAIN BIKES

2 Years

To measure the wear on your tyres and to know when they need replacing, you need to inspect the tread. The tread comes into direct contact with the terrain you are cycling on and therefore determines your tyre's performance. A tyre needs to be changed when the centre knobs are worn down to the same height as the side knobs.

To remove your tyre, first deflate the inner tube until no more air comes out. Once deflated, use a tyre lever to remove the tyre from the rim.

To put the tyre back on, place one side of the tyre into the bottom of the rim. Next, inflate your inner tube to approximately 10% before putting it into the tyre (inflating it beforehand reduces the risk of pinching the inner tube). Then, place the other side of the tyre into the rim, starting on the side opposite the valve. Before inflating the inner tube all the way, check to make sure it isn't pinched between the tyre and the rim.

Inflate your tyre carefully. The recommended pressure is indicated on the side of your tyre as well as on its product sheet (available online). Before each outing, make sure that your tyres are at the correct pressure for your ride.

When inflating your tyre, be sure to inflate it to the correct pressure for the terrain you will be riding on and especially the weather conditions. When riding in rainy weather, lower the tyre pressure to increase the tyre's traction. When riding in dry weather, you can increase the pressure for better performance.

This is a stiff bead tyre. To avoid damaging it, do not fold it. Store it in its original shape.

At B'Twin we create the tyres of tomorrow. Our R&D engineers design our tyres at our international headquarters in Lille, France. The tyre is then tested in our laboratories as well as in real world use by our professional cycling team to ensure outstanding quality. This expertise is highlighted on our range of B'Twin tyres with the label "Designed in France".

Structure : 50.0% Rubber - Synthetic, Structure : 50.0% Rubber - Natural Rubber (NR) - Latex